Astro Clock AI
Your Kundali

Divisional charts (Navamsa and Dashamsa): when and why to look deeper

A navamsa chart zooms into one life area. How D9 and D10 are made, a worked example, and where to find them in the Kundali Deep Dive tab.

By the Astro Clock AI team7 min read

Your main chart, called D1 or the Rashi chart, is the whole map of the sky at the moment you were born. Divisional charts are zoomed in maps for one subject. The navamsa chart (D9) is read for marriage, partnership and the inner strength of each planet. The Dashamsa (D10) is read for career and your public role. This post shows how both are built, with simple arithmetic you can check by hand, and when they are worth opening.

If you are new to the main chart, start with how to read your Kundali and the twelve houses explained. Divisional charts make most sense once D1 feels familiar.

What a divisional chart is

The zodiac has 12 signs of 30 degrees each. A divisional chart, also called a Varga, cuts every sign into equal parts. Each part is then mapped to a sign, and every planet is placed in the sign its part points to. The result is a new chart with the same planets in new places.

  • D9, the Navamsa, cuts each sign into 9 parts of 3 degrees 20 minutes.
  • D10, the Dashamsa, cuts each sign into 10 parts of 3 degrees.
  • D7, the Saptamsa, cuts each sign into 7 parts and is traditionally read for children.

In Astro Clock AI, the Kundali page has a Deep Dive tab. It offers a picker of divisional layers next to your D1 chart: Hora (D2), Drekkana (D3), Chaturthamsa (D4), Saptamsa (D7), Navamsa (D9), Dashamsa (D10), Dwadasamsa (D12), Shodashamsa (D16), Vimshamsa (D20), Chaturvimshamsa (D24), Saptavimshamsa (D27), Trimshamsa (D30), Khavedamsa (D40), Akshavedamsa (D45) and Shashtiamsa (D60). You pick one layer and read that layer, instead of scrolling past a dozen charts.

How the navamsa chart is calculated

The classical Parashari rule depends on the element of the sign the planet sits in. You count the 9 parts starting from a fixed sign:

Element of the D1 signSignsCounting starts from
FireAries, Leo, SagittariusAries
EarthTaurus, Virgo, CapricornCapricorn
AirGemini, Libra, AquariusLibra
WaterCancer, Scorpio, PiscesCancer

Example: Venus at 11 degrees Taurus. Taurus is an earth sign, so counting starts at Capricorn. 11 divided by 3.333 is 3.3, which falls in the 4th part. Count four signs from Capricorn: Capricorn, Aquarius, Pisces, Aries. So Venus is in Aries in the D9.

One more term. When a planet sits in the same sign in D1 and in D9, it is called Vargottama. Tradition reads this as a steady placement whose strength holds up under closer study. The app points this out for you: when a planet is Vargottama, the Navamsa layer shows a short note naming it.

What D9 shows

  • Marriage and partnership: how you relate in a close, committed bond and what you value in it.
  • The inner strength of each planet: a planet that looks average in D1 but sits well in D9 is often read as stronger than it first appears, and the other way round.
  • It is used alongside the 7th house of D1, the house of partnership, never on its own.

A simple way to read the D9 is to ask three questions. First, which sign rises in the D9, and where does its ruling planet sit? Second, where is Venus, the natural indicator of relationships, and is it comfortable in its D9 sign? Third, which planets are Vargottama? None of these answers is a verdict. Together they add depth to what the 7th house of D1 already suggests.

Many families in India look at the Navamsa during marriage discussions. It helps to remember that a D9 describes your own way of relating. It is not a score of a match, and it does not decide whether a marriage will work. Two people still build a relationship through care, communication and shared goals.

For a longer explainer on this chart alone, read Navamsa, the second chart.

How Dashamsa is calculated

The D10 rule is simpler. For an odd sign (Aries, Gemini, Leo, Libra, Sagittarius, Aquarius), you count the 10 parts from the sign itself. For an even sign (Taurus, Cancer, Virgo, Scorpio, Capricorn, Pisces), you count from the 9th sign from it.

Example: Sun at 20 degrees Aries. Aries is odd, so counting starts at Aries. 20 divided by 3 is 6.67, which falls in the 7th part. Count seven signs from Aries: Aries, Taurus, Gemini, Cancer, Leo, Virgo, Libra. So the Sun is in Libra in the D10.

The D10 is read for career style and public role: how you like to work, the kind of standing you build, and which planets support your work life. It refines the 10th house of D1, the house of career, and does not replace it.

When you compare the two, look for agreement. If the D1 10th house and the D10 both lean towards communication, teaching or service, that theme is worth trusting more. If they point in different directions, the D10 may describe a second strand of your work, such as a side project or a role you grow into later. Use it to ask better questions about your career, not to choose a job for you.

When to look deeper, and when not

  • Look at a divisional chart when your D1 reading is unclear for marriage or career, or when a decision matters a lot to you and you want a second angle.
  • Divisional charts need an accurate birth time. The D9 Lagna (the rising sign of that chart) changes about every 13 minutes on average, the D10 a little faster, and the D60 within a couple of minutes.
  • If your birth time is unknown or only a rough guess, skip them. Read the D1 planets by sign and your Moon sign instead.

The app follows the same rule. If you save a birth date without a time, the Kundali does not build houses or divisional charts, because they would not be reliable. What you can still read without a birth time explains what stays useful.

One honest caveat: the app uses its own calculation of planet positions. A planet sitting very close to the edge of a part may land in a neighbouring sign in other software. If a planet is within a fraction of a degree of a boundary, treat that placement lightly.

In the app

  1. Open your Kundali and choose the Deep Dive tab.
  2. Pick Navamsa (D9) or Dashamsa (D10) in the layer picker and compare it with your D1.
  3. Switch to the Advanced level for the fullest detail. Simple, Guided and Advanced levels explains what each level shows.
  4. Ask a question in AI Chat if a placement is confusing, for example how your D10 Sun fits with your D1 10th house.

No account yet? The free Navamsa D9 calculator, Dashamsa D10 calculator and Saptamsa D7 calculator on this website work from your birth details. The app is free to start, with passes that add more answers and charts.

Reading divisional charts calmly

A divisional chart is a magnifying glass, not a separate destiny. If D1 and D9 seem to disagree, that usually points to an area where effort and awareness matter more, not to a fixed result. Astrology describes tendencies, and your choices shape what you do with them. For decisions about money or work contracts, talk to a qualified adviser as well.

Is D9 more important than D1?
No. D1 is the base chart. The navamsa chart refines it, especially for marriage and the strength of each planet, but it is always read alongside D1.
Can I trust D9 without a birth time?
Not really. The Lagna of the D9 changes every few minutes, so it needs an accurate birth time. Without a time, the app does not build divisional charts.
How many divisional charts does the app show?
The Deep Dive tab of the Kundali offers the classical set from D1 to D60: D2, D3, D4, D7, D9, D10, D12, D16, D20, D24, D27, D30, D40, D45 and D60.
What does Vargottama mean?
A planet that sits in the same sign in D1 and in D9 is Vargottama. Tradition reads it as a steady placement, and the app names such planets in a short note on the Navamsa layer.